When you use a double cassette deck
You need to select deck A or B before operating. To select the deck, press DECK B/A to switch the display between “DECK A” and “DECK B”.
Be sure that you have set a component code each for DECK A and DECK B (page 8).
However, if you have assigned a cassette deck to another Component Select button (page 35), you can only select either DECK A or DECK B.
About the input select of a VCR
Each time the INPUT key is pressed, the input is changed in order. It is also possible to select directly as follows. “INPUT” + “0”: Tuner
“INPUT” + “1”: LINE1
“INPUT” + “2”: LINE2
“INPUT” + “3”: LINE3
“INPUT” + “4”: LINE4
“INPUT” + “5”: DV
When you use a Sony VCR, the above commands are preset. For other brands, it is possible to “teach” the above double- key operations using the learning function (page 16).
About the input select of a TV
Each time the INPUT key is pressed, the input is changed in order. It is also possible to select directly as follows when you are connecting more than two VCRs.
“INPUT” + “0”: TV tuner
“INPUT” + “1”: VIDEO1
“INPUT” + “2”: VIDEO2
“INPUT” + “3”: VIDEO3
“INPUT” + “4”: VIDEO4
“INPUT” + “5”: VIDEO5
“INPUT” + “6”: VIDEO6
If the above operations do not work, programme the remote control signals of your component on the Commander using the learning function (page 16).
15
GB