Location and Function of Controls
1Component display area
Displays the name of the component selected.
2LCD touch key display (page 11)
The keys used for operating each component are displayed.
Note
Do not press the touch keys using sharp objects such as pins or
3SYSTEM CONTROL buttons (page 23)
You can programme up to 16 consecutive key operations to each of the three SYSTEM CONTROL buttons. You can automatically carry out the entire programme by pressing one button.
4 
button (page 48)
Used to light up the LCD display in the dark. Press the button once to turn on the light, and once again to turn it off. You can also set the backlight to go off automatically after a certain period of time.
5COMMANDER OFF button
Turns the power of the Commander off.
6Component Select buttons
Selects the component to control.
7 2 +/– buttons* (page 14, 22)
Adjust the volume.
8 % button* (page 14, 22)
Mutes the audio. Press the button once again to resume at the previous volume.
9PROGRAM +/– buttons
Select the programme.
*Note on the 2 +/– and % buttons
The Commander controls or mutes the TV’s volume when you select a visual component. The Commander controls or mutes the amplifier’s volume when you select an audio component.
You can change this setting also (page 22).
Note on the power on and off of the Remote Commander
To turn on the power, press any button except the COMMANDER OFF button.
To turn off, press COMMANDER OFF, or if you don’t use the Commander, it automatically turns off after 10 minutes. This interval can also be changed (page 47).
7
GB