Transferring Data between Remote | Note |
Commanders (continued) | Be sure that the receiving remote commander is |
| ready to receive data. |
4Press the 1 key.
1:All data of the Commander
2:Data of a Component Select button
5Confirm that the receiving remote commander is ready for data.
(To set the receiving commander, follow the procedure on page 43.)
6Press the “ENTER” key.
As the data is transferred, the corresponding component name goes off. If the all data has been successfully transferred, the backlight of the display turns off.
Note
If “NG” appears while sending the data, go back to Step 5 and continue the operation or press COMMANDER OFF to stop the operation.
42
To transfer the data of a Component Select button
The data of a Component Select button on this Commander (the settings and learned signals programmed on the keys and buttons) can be transferred to a Component Select button on another Sony
4Press the 2 key.
5Press the Component Select button whose data you want to send.
6Confirm that the receiving remote commander is ready to accept data.
(To set the receiving commander, follow the procedure on page 43.)
GB