Example: To store the On/Off signal of an air-conditioner to the SYSTEM CONTROL 2 button

1Place the Commander head to head with the remote control of the air-conditioner.

Remote control of your air-conditioner

about 5 – 10 cm (2 – 4 inches) away

RM-AV2100T

2While pressing COMMANDER OFF, press PROGRAM + and 2 +.

“LEARN” appears and the display that stands for the learnable SYSTEM CONTROL buttons flashes in the display panel.

If a signal has been learned on that button, the display stays lit. If you want to programme on that button, clear the signal first (page 40).

3Press the SYSTEM CONTROL button you want to teach.

“LEARN” flashes and the display for the pressed SYSTEM CONTROL button stays lit.

4Press and hold down the button of the remote control until you hear a beep.

(If you release the button before you hear a beep, the signal may not be learned correctly.)

“LEARN” display stops flashing and stays lit.

If “NG” flashes on the display

Learning did not succeed. Try Steps 3 and 4 again.

5Press COMMANDER OFF.

39

Continued GB