Adjusting the Backlight of the Display Window

The Commander is preset at the factory to bright backlight, and to switch off the backlight automatically after 10 seconds. To change this setting, perform the following procedure.

You can adjust the backlight Automatic- Off time (from 10 seconds to 90 seconds in the units of 10 seconds) and the brightness (bright or dim).

1While pressing COMMANDER OFF, press .

48

The number which shows current Automatic-Off time and the arrow indicating the current brightness of the backlight stay lit. Other numbers and the opposite arrow will flash.

2Press one of the 1 – 9 keys to select the Off time.

For example, to set the Automatic-Off time to 20 seconds, press the 2 key.

“2 “ stops flashing and stays lit.

3Press the M or m key, to select the brightness.

To brighten, press M, to dim, press m.

The chosen arrow stays lit.

4Press COMMANDER OFF.

GB