Sony Security Camera Camera IP Address Configuration and Registration to NSR, Host Name, Domain Name, 13 Click [Finish], Enter the host name, Example: xxx.sony.co.jp

10 Select the appropriate video format, depending on your region, [NTSC] or [PAL], and then click [Next].

*This screen only appears when using the NSR-100/50.The [Host Name] screen appears.11 Perform settings for each item, and then click [Next].

Host Name

Enter the host name.

Note

Use only alphanumeric characters, underscores (_), and hyphens (-).Domain NameEnter the network domain name according to your network.Example: xxx.sony.co.jp

When you do not register the NSR to the DNS, you do not need to change the default settings.

The [Summary] screen appears.12 Confirm the settings and then click [Next].

The [Warning] screen appears.13 Click [Finish].The NSR restarts automatically.

Camera IP Address Configuration and Registration to NSR

After restarting, the logon screen appears.Next, configure the IP addresses for cameras and register them to the NSR.1 Type your user name and password, and then click [Log on].Default User Name: adminDefault Password: adminThe Camera screen appears in the Configuration window.2 Click [Camera IP Setup].

If the IP addresses for the cameras have already been set, click [Register All] and proceed to Step 5.

The Camera IP Setup window appears.

Initial Operations (Basic Initial Setup) 19