Sony Security Camera Turn the Power On and Off, Initial Operations (Basic Initial Setup), Basic Configuration, Turning On the Power, Turning Off the Power

Turn the Power On and OffTurning On the Power

Press the power switch.

When startup is complete, the power indicator LED lights green.

Notes

•Immediately (about 2 seconds) after the power is turned on, the cooling fan makes a loud noise. This is normal and not a sign that the unit needs to be serviced.

•When the NSR starts for the first time, the Setup Wizard starts automatically. For details about the setting procedure, refer to the “User’s Guide” (PDF) on the supplied “NSR Series Manual, Tool & Source Codes CD”.

•If the NSR was previously shut down improperly, startup may take longer than usual.

Turning Off the Power

1 Log on to the NSR, and click [System] at the top of the window.

The System Menu screen appears.

2 Click [Shutdown].

A confirmation message appears.

3 Click [OK] to confirm.

The system shuts down, and then the unit shuts down.

Initial Operations (Basic Initial Setup)Basic Configuration

1 Connect the USB keyboard and USB mouse to the unit, and turn on the power.

The following screen appears, and a progress bar for hardware startup appears.

Then the following screen appears, and a progress bar for software startup appears.

The unit starts and the system settings screen (Setup Wizard) appears.

2 Click [Next].

The [Select Language] screen appears.

16 Turn the Power On and Off / Initial Operations (Basic Initial Setup)