Usage PrecautionsImportant Information About Safety

•The electrical specifications of this unit are as follows. Be sure to connect the unit only to a power source that conforms fully to these requirements.

-Voltage: 100 - 127 / 200 - 240 V AC-Current consumption: 8/4 A-Line frequency: 50/60 Hz

•Use only the supplied power cord. Do not coil the power cord or bundle it with other cords. Do not piggy back connections. If current ratings are exceeded, there is a risk of fire and other accidents.

•Make sure that all AC outlets and power cords are properly grounded.

•Do not use the unit with the cover or case opened or removed. Otherwise there is a risk of fire and electric shock. Do not attempt to open or remove the cover or case yourself. Always consult your supplier if opening is necessary.

Important Information About InstallationLocations for use/storage

To prolong the life of the product, avoid use or storage in the following locations.

•Locations that can become extremely hot or cold. (The allowable usage temperature range is +5 ºC to +40 ºC/ +41 ºF to +104 ºF.)

•Locations exposed for an extended time to direct sunlight, and locations near heating appliances. (Note that the temperature in a closed car in summer can exceed +50 ºC/+122 ºF.)

•Locations with high levels of humidity or dust•Locations subject to strong vibrations•Locations subject to strong magnetic fields

•Locations in the vicinity of radio or TV transmitters creating a strong magnetic field

Do not block the ventilation openings

•The ventilation openings on the sides of the unit serve to prevent internal heat buildup. Always leave a clearance of at least 10 cm (4 inches) on both sides as well as behind and above the unit.

•Do not use the unit in a closed box or other enclosure.

•Make sure that there are no cables or other objects in the vicinity of the fan opening on the rear of the unit. If the opening is blocked, internal heat buildup can occur, leading to the risk of fire and damage.

•Also when the unit is installed in a rack, you must make sure that the fan opening on the rear as well as the ventilation openings on the front are not blocked by cables or other objects. Do not install the unit in an environment where the above requirements cannot be met.

Use the unit in a horizontal position•The unit is designed to be operated in a horizontal position.

•Do not install the unit on a slanted surface, and protect the unit from shocks.

•When the unit is dropped or otherwise subject to strong shocks, it can be seriously damaged.

•When installing the unit in a rack, make sure that a horizontal position is maintained. If the unit is not properly levelled, malfunction may occur. Also, it is highly recommended to properly anchor the rack to a wall or similar, so that it cannot topple over.

Maintenance

•Before cleaning the unit or performing any other kind of maintenance, be sure to disconnect the power cord from the AC outlet.

•For cleaning, lightly wipe the cabinet and panels with a dry cloth. To remove stubborn stains, lightly moisten the cloth with a mild, neutral detergent and wipe with a dry cloth afterwards.

•Do not use cleaning alcohol, solvents, benzine,

insecticide, or any other volatile substances, because these may damage the finish and lead to discoloration.

• Dust can accumulate in the ventilation openings on the GB front of the unit. When removing the dust, make sure

that you do not subject the unit to shocks or vibrations.Transport

Use the original packing material or similar packing to protect the unit from shocks.

Precautions for products with built-in

HDD

This unit has a built-in hard disk drive (HDD). The HDD is a precision device. If subject to shock, vibration, static electricity, high temperature or humidity, data loss can occur. When installing and using the unit, closely observe the following precautions.

Protect from shocks and vibrations

When subject to shocks or vibrations, the HDD can be damaged and loss of data on the HDD can occur.

•When transporting the unit, use the specified packing material. When transporting on a dolly or similar, use a type which does not transmit excessive vibrations. Excessive shocks and vibrations can damage the HDD.

•Never move the unit while it is powered. Also before removing or inserting the unit in a rack, make sure that power is off.

•Protect all HDD-equipped devices in the rack from shocks.

•Before removing or inserting the unit in a rack, make sure that power to any other HDD-equipped devices in the rack is also switched off.

•Do not remove panels or outer parts of the unit.

Usage Precautions

3