Features and FunctionsFront

NSR-100/50

1

2

3

4

5

6

POWER

NETWORK 1 2 3

HDD 1 2 3 4

STATUS 1 2 3 4

ERROR

REC

qg qf qd qs qa 0 9APower LEDAlternates between green and amber lights when the unit is starting up.Lights green when startup is complete. Lights amber when it is on standby.BNetwork LED (1 to 3)

Lights green when there is activity at the corresponding LAN connector at the rear of the NSR.

CHDD LED

Blinks green when the internal hard disks are accessed. Lights amber when an error occurs with a hard disk.

DStatus LED (1 to 4)

Lights in sequence (1, 2, 3, 4) when the NSR starts. When an error occurs, the corresponding status LED lights together with the error LED, which lights or blinks to indicate the type of error.

For details, see “STATUS LED” (page 23).EError LEDLights or blinks when an error occurs.FREC LEDLights when recording images.GDVD/CD driveUse this drive to write data from the NSR hard disks to DVD and CD.

*For details on compatible media, refer to the “User’s Guide” (PDF) on the supplied “NSR Series Manual, Tool & Source Codes CD”.

8 7

HUSB connector

Use this connector to connect a USB keyboard, mouse, USB flash memory or the RM-NS10 remote control to the NSR.

IAudio input connector*

Use this connector to input audio from a peripheral audio device, such as a microphone.

JAudio output connectors (L and R)Use these connectors to output audio to a peripheral audio device.KVideo output connectorUse this connector to output video to a peripheral video device, such as a VCR.The displayed images are the same as those for monitor connector 1.LMonitor connector 1Use this connector to connect a monitor.MCompactFlash card slot

Use this slot to save configuration data from the NSR hard disks to a CompactFlash card.

Features and Functions

7