Rack Mount Installation

Install the NSR in a rack using the optional rack mounting kit (sold separately).

Warning

•Do not use a rack mounting kit other than the optional mounting kit (sold separately) for the NSR, as doing so is dangerous and may result in fire, shock, or injury.

•If you mount the NSR in a rack, make sure not to place heavy object on it.

•Before mounting the NSR in a rack, we recommend that you mark its intended position in the rack with a felt-tip pen. Mounting the NSR in the rack otherwise than horizontally could result in malfunctions.

•To order a rack mounting kit, contact your retailer.Pulling Out the Inner RailsPull out the inner rails from the rail assemblies.1 Pull out the inner rail from one of the rail assemblies as far as it can go.

Back of rail assembly

Inner rail

Rail assembly

2 Turn the rail assembly over. As you pull the green tab outward to release the lock, pull the inner rail all the way out.

Green tab

3 Repeat the same procedure with the other rail assembly to pull out its inner rail.

Note

The inner rail will be installed on the NSR, while the rail assembly will be installed on the rack.

Preparing the NSRUse the supplied fasteners and screws to install the inner rail on the NSR.

1 Use the supplied flat head screws to attach the mounting ears to the front of the side panel.

Mounting ear

Flat head screws

2 Use the remaining supplied round head screws to install the rails to the NSR, as illustrated.

Rail

Green tab

Round head

screws

Caution

Using screws other than the supplied screws may damage the unit. Be sure to use the supplied screws to install the rails.

Preparing the RackInstall the rails on the rack.1 Determine where you want to install the rails on the rack.We recommend marking this position with a marker or felt tip pen.

Caution

Rails installed at different heights could result in NSR malfunctions.

12 Installation