Sony Security Camera NSR-100/50), Types) (Only the, Reconstructing Data, Volume (Changing RAID

8 When you have verified the settings for each camera, click [Monitoring].

The “Monitoring” window appears.

By clicking [Configure], you can switch to the “Configuration” screen and make changes to the settings.

*For details on how to use the “Monitoring” screen and “Configuration” screen, refer to the User’s Guide (PDF) included on the supplied NSR Series Manual, Tool & Source Codes CD.

Reconstructing DataVolume (Changing RAIDTypes) (Only theNSR-100/50)

RAID constructions that can be set as data volumes differ depending on the model number within the NSR-100/50.

* RAID is not available for the NSR-25.

Model	Type	Approximate	Redund-	Default
		capacity	ancy	setting
NSR-100	RAID-5	670 GB	Yes	Yes
	RAID-1+0	450 GB	Yes
	RAID-0	900 GB	None
NSR-50	Spanning	430 GB	Partial	Yes
	RAID-1	210 GB	Yes

Caution

•Be aware that all setting information and recorded images are deleted when reconstructing data volume.

•When changing the settings is necessary, make sure to change the RAID construction beforehand.

1 Connect the USB keyboard and USB mouse to the NSR, and turn on the power.

The following screen and a progress bar for hardware startup appear.

2 Press F12 on the keyboard while the progress bar is displayed.

The screen similar to the following appears. Example: For the NSR-50 (there are 3 menu items for the NSR-100)

*The number of devices and their names may differ from the following example screen.

Reconstructing Data Volume (Changing RAID Types) (Only the NSR-100/50) 21