2 Install the rails on the rack.

(1)Adjust the length of the rails to match the length of your rack.

2 Lift the NSR, fit the inner rails into the slide rail grooves (white), and then slide the assembly until it stops.

Inner rail

(2)Use the supplied truss screws and washers to secure both ends of the rails to the rack.

Truss screws

Washers

3 As you pull the green tab inward to release the lock, slide the NSR as far as it can go.

Green tab

Mounting the NSR on the Rack

Insert the NSR into the rack, and then secure it.

Caution

At least two people are needed in order to handle the unit to prevent personal injury.

1 Pull the sliding rails from the rail assemblies.

Installation 13