Boot Menu

1.QSI DVD+/-RW SDW-0826

2.WDC WD2500JD-22HBC0-(S1)

3.WDC WD2500JD-22HBC0-(S2)

4.PQI IDE DiskOnModule-(SM)

<Enter Setup>

3 Use the arrow keys on the keyboard to select [IDE DiskOnModule], and press Enter.

Startup from DiskOnModule (DOM) begins.

After startup, the DOM menu appears.

4 Click the third item from the top, [Clean System Restore with Changing RAID Types].

The RAID Type selection screen appears.

5 Select the RAID Type, and click [OK]. Example: For the NSR-50

The confirmation screen appears.

6 Click [OK].

RAID reconstruction for data volume and full system restoration begins.

This process can take up to about 5 hours. A progress bar appears during the process. When the process successfully completes, a notification screen appears.

Example: For an NSR-50 with RAID 1 selected

7 Press Enter after the process completes and the message [Press any key to continue!] appears. The screen returns to the DOM menu.

8 Click [Reboot].

The NSR reboots, and the Setup Wizard appears.

22 Reconstructing Data Volume (Changing RAID Types) (Only the NSR-100/50)