Installing the Software on a Windows Computer
Note:
For comprehensive instructions on installing the Sprint Connection Manager software and activating the card, see the Getting Started guide.
Before you can use your card, you must first install the card’s software and configure the card for your computer. The installation process consists of:
⬤Card insertion - Inserting the card, which automatically installs the drivers and the Sprint Connection Manager software on your computer (described in this section).
⬤Card activation and provisioning - Activating your Sprint account and configuring the card to use your account. (See “Setting Up Service [Windows]” on page 31.)
Note:
Windows Vista and Windows 2000 users: You must log in with administrative privileges to install the software and drivers.
Windows XP users: You may need to log in with administrative privileges, depending on your Windows configuration.
Before beginning the installation process, it is recommended that you close all open applications.
To install the software and drivers on your computer:
1.If your card has not yet been activated, ensure you are in the network coverage area (not roaming).
2.If your computer does not have an ExpressCard slot, ensure the ExpressCard to PC Card adapter (included in your package) is label side down, and insert the adapter into your computer’s PC Card slot.
18 | Section 2A: Installing the Software on a Windows Computer |
