82 Section 3C: Changing Sprint Connection Manager Settings (Windows)
Roam Mode:
Sprint
Disable roaming when you are not in the network coverage
area. You will be able to connect only when you are in the
network coverage area.
Roam Mode:
Automatic
Allow roaming when you are not in the network coverage
area.
Note: Roaming rates may apply. Roam Guard (page63) can remind
you of this.
Roam Mode:
Roam Only
Allow only roaming.
Note: Roaming rates may apply. Roam Guard (page63) can remind
you of this. SprintLocation Services may not be available.
Roam Mode:
Roam Guard
Display a warning message when you are about to establish a
data connection while roaming. For more information, see
“Roam Guard” on page63.
Available only if RoamMode is set to Automatic (page 82).
Note: If you proceed with the data connection, roaming rates may
apply.
Device LED
Enabled
Enable or disable the LED of your card.
For a description of the LED states, see “LED Operation” on
page 136.
Activation
Wizard
Used only when activating a card, or when changing your
card’s phone number (page33).
User Lock
Change
Change the security lock code of the card (page70).
Auto Launch Optionally specify which application to automatically launch
when a connection is established.
See “Auto-launch upon Network Connection” on page64.
Menu Item Description