Ending a Connection
To end a connection:
▶In the Mobile Broadband window, click Stop.
This ends your data connection, and also your GPS connection, if it is open.
Note:
The Stop button in the GPS Receiver window ends only your GPS connection; data may still be transferred.
If Enable Network Adapter (NDIS) (page 81) has not been selected and you exit Sprint Connection Manager while a connection is in progress, a window opens asking whether you want to disconnect the call. Click Yes to end the connection and exit Sprint Connection Manager. (See “Exiting Sprint Connection Manager” on page 61.)
If Enable Network Adapter (NDIS) has been selected, manually disconnecting will leave the card disconnected. It will not reconnect until you remove and reinsert the card.
If GO automatically when ready (page 81) has been selected, manually disconnecting will leave the card disconnected. It will not reconnect until one of the following occurs:
⬤You make a connection through Sprint Connection Manager
⬤A GPS fix is successfully acquired after you initiate Sprint Location Services (page 55)
⬤You restart Sprint Connection Manager
Online Help
Sprint Connection Manager includes extensive online help to provide operating hints and
With Sprint Connection Manager running, you can access online help in several ways:
⬤Press <F1> when Sprint Connection Manager is the active window.
⬤From Sprint Connection Manager, select MENU > Help.
⬤
) and select Help.
The help file has a table of contents and an index.
