CMODe Subsystem (Audio Analyzer)

AM700 Audio Measurement Set Programmer Manual 3–43
CMODe:FILTer:TYPE[1|2] ’filter_name’
Usage: Selects the filter type used for Audio Analyzer measurements.
NOTE. Parameters are case sensitive and must be entered as indicated in the
parameters list in single quotation marks.
Suffixes: TYPE1 Channel 1 Filter
TYPE2 Channel 2 Filter
Parameters: ’NONE’ No filter type selected
’CCIR468’ CCIR 468
’CCIRARM’ CCIR ARM
’AWeight’ A Weighting
’BWeight’ B Weighting
’CMessage’ C Message
’CWeight’ C Weighting
’FWeight’ F Weighting
’LP15000’ 15 kHz low pass
’HP400’ 400 Hz high pass
Query: CMOD:FILT:TYPE[1|2]? returns the currently selected ’filter_name’ in
double quotation marks as a SCPI string. For example:”CCIR468”  

*RST: Sets ’filter_name’ to ”NONE” and turns off the filter selection.