Specifications
TDS5000B Series Specificationsand Performance Verification 1-23Table1- 11: Certifications and compliances
Category Standardsor description
ECDecl aration of Conformity --
EMC
Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance was
demonstrated to the following specifications as listed in the Official Journalof theEuropean Union:
EN61326 Em issions 1,3, 4 Class A Radiated and Conducted Emissions
EN61326 I mmunity 1, 4
IEC 61000-4-2 Electrostatic Discharge Immunity
±4kV cont act discharge, ±8 kV air discharge
IEC 61000-4-3 RFf ield immunity
3V/m,80MHzto1GHz,
80% amplitude modulated with a 1 kHz sinewave 2
IEC 61000-4-4 Electrical Fast Transient/Burst Immunity
1kV on AC m ains, 500 V on I/O
IEC 61000-4-5 ACSurge Im munity
500V di fferential mode, 1 kV common mode
IEC 61000-4-6 RFConduct ed Immunity
3V, 150 kHz to 80 MHz, ampli tude modulated with a
1kHz si newave 2
IEC 61000-4-11 AC Mains Voltage Dips and Interruption Immunity
100% reduction for one cycle
EN61000-3-2 PowerHarmonic Current Emi ssions
EN61000-3-3 VoltageChanges, Fluct uations, and Flicker
1Usel ow-EMI shielded interconnect cables, equivalent to the following Tektronix cables:
GPIB cable: 012-0991-01,012-0991-02, or 012-0991-03.
RS-232cable: 012-1213-00or CA part number 0294-9.
Centronics Cable: 012-1214-00 or LCOM part number CTL3VGAMM-5 VGA Cable.
2Undertheses condi tions, the specifications are amended as follows:
1m V/division to 1 V/division: ≤0.2 division waveform displacement or ≤0.4 divi sion increase
in peak-to-peaknoi se.
3Radiated emissions may exceed the levels specified in EN 61326 when this oscilloscope is
connected to a test object.
4Testedin accordance with EN 61326 Annex D.
FCC Radiated and conducted emissions do not exceed the levels specified in FCC47 CFR, Part 15,
SubpartB, f orClass A equipment .