Setting the Print Calibration

yThe print calibration setting in the [ADMIN] menu can be configured only when an adminis- trator has set the Calibration Display Level to [ADMIN].

P.124 “Setting the Calibration and Registration Display Level”

yWhen the private print jobs, schedule print jobs, or invalid jobs are stored in the job list, the calibrations cannot be performed. In that case, delete the jobs in the job list.

This function allows the machine automatically to calibrate the color gradation for print jobs when the color cannot be adjusted well because the shading or the hue of the image has devi- ated.

ySet the LT-sized or A4-sized paper (recommended paper) in the cassette before starting the calibration. If any other paper is used, calibration may not be performed properly.

yIf the color often deviates, call your service technician.

yIf the glass is dirty or any foreign objects are stuck to the glass, the calibration may not be carried out properly. Keep the glass clean.

yNever raise the original cover or the optional Automatic Document Feeder, or open the front cover while the calibration is in progress. If this does happen, the calibration cannot be fin- ished appropriately.

yInterrupt copying is not available during the calibration.

1 Place the LT-size or A4-size paper in the cassette. 2 Press the [GENERAL] button.

yThe GENERAL menu is displayed.

To display the ADMIN menu, see "ENTERING TO ADMIN MENU".

P.107

SETTING GENERAL FUNCTIONS 129

Page 131
Image 131
Toshiba 3510C, 3500C, 2500C manual Setting the Print Calibration