6 Enter new 5-digit code in the “New Code” field using the digital keys, and then press the [SET] button to set the entry.

yIf you enter the code, asterisks (*) appear in the “New Code” field.

yIf you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.

yAfter pressing the [SET] button, the “Retype New Code” field is highlighted.

The department code must be the 5-digit code except “00000”.

If you want to return to the “Current Code” field to retype it, press the [RESET] button.

7 Enter new 5-digit code again in the “Retype New Code” field using the digital keys, and then press the [SET] button to set the entry.

yIf you enter the code, asterisks (*) appear in the “Retype New Code” field.

yIf you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.

If you want to return to the “Current Code” field or “New Code” field to retype them, press the [RESET] button.

8 Press the [ENTER] button at the bottom of the touch panel. y The LIMITATION screen is displayed.

MANAGING DEPARMENT CODE 65

Page 67
Image 67
Toshiba 2500C, 3500C, 3510C manual Managing Deparment Code