3 SETTING ITEMS (USER)
90 SETTING SCAN FUNCTIONS
SETTING SCAN FUNCTIONS
You can change the initial setting (default setting) of scan job.
1
Press the [USER FUNCTIONS] button on the control panel to enter
the User Functions menu.
2
Press the [USER] button, and then press the [SCAN] button on the
touch panel.
yThe SCAN screen is displayed.
3
Specify the following items as you require.
yIn the “COLOR MODE” option, press the desired mode button.
yIn the “COMPRESS” option, press the desired mode button that applies when scan-
ning in gray scale, full color, or auto color mode.
yIn the “SINGLE/2-SIDE SCAN” option, press the desired mode button.
[SINGLE] — Press this to set single page scan as default scan mode.
[BOOK] — Press this to set book scan mode as default scan mode. This enables to
scan both side of originals in the same direction.
[TABLET] — Press this to set tablet scan mode as default scan mode. This enables
to scan front page in the general direction, and scan back page rotated 180 degree.
yIn the “ROTATION” option, press the desired mode button.
4
Press the [Next] button to display the next screen.