
6 Specify following items as you required.
yTX TYPE — This sets the type of the fax transmission mode. Press the [MEMORY TX] button to select the memory transmission mode or the [DIRECT TX] button to select the direct transmission mode.
yECM — Select whether enabling or disabling the ECM (Error Correction Mode) to automatically resend any portion of the document affected by phone line noise or dis- tortion. Press the [ON] button to enable the ECM, or the [OFF] button to disable the ECM.
yQUALITY TX — Select whether a document is sent in the Quality TX mode. This fea- ture allows to send a document at a slower speed than a normal so that the transmis- sion will be less affected by line condition. Press the [ON] button to enable the Quality TX, or [OFF] button to disable the Quality TX.
yLINE SELECT — Select the line to be used for the fax transmission. Press the [LINE1] button to use the Line 1, or [LINE2] button to use Line 2. The [LINE2] button can be selected only when the optional 2nd line board is installed.
y[SUB] — Enter the mailbox number if you want to send originals to the mailbox in the remote fax.
y[SID] — Enter the password to input a document into the mailbox in the remote fac- simile.
y[SEP] — Enter the mailbox number if you want to retrieve a document from the mail- box in the remote fax.
y[PWD] — Enter the password to retrieve a document from the mailbox in the remote facsimile.
When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is dis- played. Enter the value using the keyboard and digital keys, and press the [ENTER] but- ton to set the entry.