Toshiba 5520c manual „ Originals and paper

8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

„ Originals and paper

Problem Description	Cause	Corrective Action
The original is jammed.	The original is unavailable on the	Check whether the original is available on the equipment.
	equipment.	For details, refer to Chapter 2 of the Copying Guide.
Paper is jammed.	The paper is unavailable on the	Check whether the paper is available on the equipment.
	equipment.	For details, refer to Chapter 1 of the Copying Guide.
	The paper size setting registered for	Match the size of the paper placed in the drawer or on the
	the equipment is inconsistent with	bypass tray and the size registered on the equipment.
	paper in a drawer or on the bypass	For Details, refer to Chapter 1 and 2 of the Copying
	tray.	Guide.
	The paper type setting registered for	Match the type of the paper placed in the drawer or on the
	the equipment is inconsistent with	bypass tray and the one registered to the equipment.
	paper in a drawer or on the bypass	For Details, refer to Chapter 1 and 2 of the Copying
	tray.	Guide.
	The bundle of paper exceeds the	Remove some paper to set it within the height limit line
	height limit line indicated on the side	indicated on the side guide.
	guide.
	There is too much space between the	Adjust the space between the paper and the side guide or
	paper and the side and end guides of	the end guide not to take much spaces. If the thick paper
	the drawer.	is jammed, take a little space between the paper and the
		side guide.
		For details, refer to Chapter 1 of the Copying Guide.
	Hidden jammed paper has not been	Check the sign again on the touch panel to see where the
	removed.	jam occurred.
		P.11 “Clearing a Paper Jam”
Two or more sheets of paper are	Sheets of paper are stuck together.	Loosen the stack of paper well and set them again.
fed together.
Sheets do not align when exiting.	Sheets are placed in the drawer with	Check the printing side of the sheets and place them
	the wrong side up.	correctly. Information about the printing side may be given
		on the wrapping paper of the sheets.
		If you cannot find which side is the printing side, try
		printing on both sides to see if the sheets align when
		exiting.
“UNDEF” indication appears	The paper unavailable for the drawer	Check whether the paper you set is available for the
instead of the paper size	is placed.	drawer.
indication on the drawer button of		For details, refer to Chapter 1 of the Copying Guide.
the touch panel when the paper
	There are too much spaces between	Adjust the space between the paper and the side guide or
is placed.
	the paper and the side guide or the	the end guide in order not to take much spaces.
	end guide.
The message indicating no paper	Sheets placed in the drawer are not	Remove the sheets from the drawer, align them, and
does not disappear even after	aligned.	replace them.
paper is placed in the drawer.
	The side and end guides do not	Adjust the side and end guides to match the paper size.
	match the paper size in the drawer.
	The amount of paper placed in the	Place more than 10 sheets of paper in the Tandem Large
	Tandem Large Capacity Feeder is too	Capacity Feeder.
	small.

When You Think Something Is Wrong With the Equipment 107