1 TROUBLESHOOTING FOR THE HARDWARE
2
3
Remove the jammed paper.
Return the duplexing unit to its original position.
Hold the position shown in the figure when closing it.
Do not put your hand or fingers on the duplexing unit when closing it.
They could be caught and this could injure you.
Fuser unit
1 Pull out the duplexing unit from the equipment. Grasp the lever of the duplexing unit and pull it until it stops.
Be careful not to touch the slide rails (A in the figure).
This could injure you.
A |
A |
2 Turn the green dial and remove the paper coming out of the bottom of the fuser unit.
3 Holding the green lever, pull out the transport guide toward you.
