
1 TROUBLESHOOTING FOR THE HARDWARE
3
4
Remove the jammed paper.
Close the duplexing unit cover.
Do not put your hand or fingers on the duplexing unit cover when closing it.
They could be caught and this could injure you.
5 Close the bypass tray.
Paper jam in the Finisher and the Hole Punch Unit (both optional)
1Separate the Finisher from the equipment.
1)Open the front cover of the Finisher when the Hole Punch Unit is not installed. Open the Hole Punch Unit cover when the Hole Punch Unit is installed.
2)Pull the knob to unlock the Finisher.
When the Hole Punch Unit is not installed
1 | 2 |
When the Hole Punch Unit is installed
2 |
1 |