1 TROUBLESHOOTING FOR THE HARDWARE
Paper jam in the Saddle Stitch unit (optional)
The Saddle Stitch unit is inside the Saddle Stitch Finisher
1 Remove the paper jammed in the paper exit side of the Saddle Stitch unit.
2 Separate the Finisher from the equipment.
1) Open the front cover of the Finisher when the Hole Punch Unit is not installed. Open the Hole Punch Unit cover when the Hole Punch Unit is installed.
2) Pull the knob to unlock the Finisher.
When the Hole Punch Unit is not installed
1 | 2 |
When the Hole Punch Unit is installed
2 |
1 |
3) Move the Finisher slowly placing your hands on the positions shown in the figure.
When the Hole Punch Unit is not installed | When the Hole Punch Unit is installed |
3 Remove the jammed paper from the right side.
