
7
8
9
Press the [ON] or [OFF] button.
• The default setting is ON.
Select the desired number (either 40 or 120 communications).
• The default setting is 40.
Press the [ENTER] button.
6
Setting the communication report output
The following conditions of the communication report output can be set.
MEMORY TX: | OFF, ALWAYS, ON ERROR | |
DIRECT TX: | OFF, ALWAYS, ON ERROR | |
MULTI TX: | OFF, ALWAYS, ON ERROR | |
POLLING: | OFF, ALWAYS, ON ERROR | |
RELAY ORIGINATOR: | OFF, ALWAYS, ON ERROR | |
RELAY STATION: | OFF, ALWAYS, ON ERROR |
RELAY DESTINATION: OFF, ALWAYS, ON ERROR
If the [ALWAYS] button is selected: The report is output after every communication is completed.
If the [ON ERROR] button is selected: The report is output when a communication error has occurred. If the OFF button is selected. The report is not output.