Toshiba GD-1200 manual Setting originals When setting originals on the glass

3.About Originals (Cont.)

Setting originals

When setting originals on the glass

Originals are sent in the order they are placed on the original glass in both the memory TX and direct TX modes.

21 Raise the Original Cover (optional) the Reversing Automatic Document Feeder (optional), and place the original A with its face down on the glass.

• Raise it 60 degrees or more to detect the original.

A

2 Align the original against the left inner corner of the glass.

•Different size originals can also be sent in one transmission.

•When LD, LG, LT-R, ST, COMP, A3, A4-R, A5, B4, B5 or FOLIO originals are placed as shown in the figure on the right, the pre- entered sender information is printed in the shaded position

shown B in the figure and sent to the remote Fax.

• Entering the sender information ( P.148 “2.Registering the Ter- minal ID”)

•When transmitting non-standard-sized originals, best results are obtained by placing the originals horizontally on the glass.

•When LT, ST-R, A4, A5-R or B5-R originals are placed as shown in the figure on the right, the pre-entered sender information is printed in the shaded position shown C in the figure and sent to the remote Fax.

B

C

3 Lower the Original Cover (optional) the Reversing Automatic Docu- ment Feeder slowly.

24 2.SENDING A FAX