8 If you want to send the relay destination transmission report, press the [YES] button.

If you press the [NO] button here, steps 9 and 10 are not necessary.

For the relay destination transmission report, see

P.122 “2.Automatically Printing Lists & Reports”.

The default operation of the relay destination transmission report is "On Error". For configuration of this opera-

5

tion, see

P.125 “Setting the communication report output”.

 

9 Specify the remote Fax to receive the relay destination transmission report from the address book or by a direct dialing (with the digital keys).

Only one remote Fax can receive this report.

To correct the selected remote Fax, Specifying from the address book:

Press the [FAX] button of the selected remote Fax (the highlight will be cleared) and then press the [FAX] but- ton of the correct remote Fax.

Specifying by a direct dialing:

Press the [B Space] button to delete the wrong number and then key in the correct number.

10Confirm that the registered information is correct, and then press the [ENTER] button.

The registered mailboxes can be confirmed in a mailbox list. ( P.121 “Printing ITU mailbox list”)

87

Page 89
Image 89
Toshiba GD-1200 manual For the relay destination transmission report, see