3.About Originals (Cont.)

When using the Reversing Automatic Document Feeder (optional)

When the originals are placed on the Reversing Automatic Document Feeder, the uppermost page is first scanned and sent.

2

After aligning the edges of originals,

1 place them with their face up and slide

the guides to the width of the originals.

• LT/A4 size originals are rotated 90 degrees so that they are sent as LT-R/A4-R originals.

• If a mixture of LD and LT, A3 and A4, or B4 and B5 originals are placed, they are sent in their original sizes.

• To set the originals with different width, see P.31 “Sending dif- ferent width originals”.

• When LD, LG, LT-R, COMP, A3 and B4, A4-R, B5 originals are placed as shown in the figure on the right, the pre-entered sender information is printed in the shaded position shown A in the figure and sent to the remote Fax.

• Entering the sender information ( P.148 “2.Registering the Ter- minal ID”)

A

When LT, ST-R, A4, A5-R or B5-R originals are placed as shown in the figure on the right, the pre-entered sender information is printed in the shaded position shown B in the figure and sent to the remote Fax.

B

26

2.SENDING A FAX

 

Page 28
Image 28
Toshiba GD-1200 manual When using the Reversing Automatic Document Feeder optional, After aligning the edges of originals