Each press of a digital key dials a number. If you make a mistake when dialing the remote Fax number, press the [MONITOR/PAUSE] button to cut the line, and then press the [MONITOR/PAUSE] button again to redial.
6 When you hear the answer tone (short high-pitched tone) through the built-in speaker indicating the connection has been made with the remote Fax, press the [START] button.
When you hear the other party’s voice answering the call before pressing the [START] button, pick up the hand- set of the external telephone and press the [MONITOR/PAUSE] button. Then, ask him/her to operate their equip- ment for receiving a Fax.
• Specifying by digital keys (
• Specifying by address book (
P.35 “Direct entry with digital keys”)
P.36 “Address book entry”)
Specify the remote Faxes.
5
• You will hear the dial tone from the built-in speaker.
• To cancel the setting, press the [MONITOR/PAUSE] button again.
Press the [MONITOR/PAUSE] button.
• P.27 “4.Setting the Transmission Conditions”
P.24 “Setting originals”
•
Place the original(s).
1
2 Press the [FAX] button on the control panel.
3 Press the [OPTION] button and set the transmission conditions.
4
Other transmissions
In this mode, you can confirm the answering tone from the remote FAX without picking up the handset of the external telephone.
When the other party receives the call as a telephone call, you can talk by picking up the handset of the external telephone.
• This operation is available when the Line 1 lamp is OFF.
2
51
