04_ContProtocolsControlPanel.fm Modified: 8/16/02
Template Version 1.0
48 GL-1020 Administrator’s Guide
Configuring AppleTalk Protocol Settings
1 From the Network Setting menu, press APPLETALK to display
the AppleTalk Setting screen.
Sample AppleTalk Setting screen on copier control panel
Note: Currently, the controller supports EtherTalk access
only; TokenTalk is not supported.
2 By default, Macintosh printing is enabled. If it has been
disabled, press ENABLE to establish Macintosh print services.
3Press
APPLETALK NAME to display the touch keyboard.
4 Enter the AppleTalk name. The name is the same as the
Microsoft Computer Name (device name).
By default, the device name is GL<MAC Address>, where
MAC Address is the media access control number of the NIC
installed in the controller. For example, GL00DOC9165206.
You can specify a different name of up to 15 alphanumeric
characters, provided it is unique within your network.
5Press
DESIRED ZONE to display the touch keyboard.
6 Enter the AppleTalk Zone, which is “*” by default. This
indicates the local zone, although you can specify a different
name of up to 15 alphanumeric characters.
7Press
OK to save your changes.