04_TAConfigureNetworkProtocols.fm Modified: 8/16/02
Template Version 1.0
GL-1020 Administrator’s Guide 99
4 Select Enable to enable Appl eTalk.
This is the default setting.
5 Enter the AppleTalk Zone string.
6Click
Save.
7 Follow the ins tructions in Applying Changes to Protocol
Settings on page96.
Restoring Default Protocol Settings
You can restore the network settings to their default values.
Restoring the defaults returns the device to the state in which it
was delivered from the factory.
1 On the Administration tab, click the Setup subtab.
2Click the Network link.
The Network page opens.
3Click
Restore Defaults to restore the default settings.
4Click
Yes.
5 Follow the ins tructions in Applying Changes to Protocol
Settings on page 96.