Toshiba tecra s3 5. Slide your fingernail or a thin object under the cover and lift it off

Optional Devices

5. Slide your fingernail or a thin object under the cover and lift it off.

Memory module cover

Screw

Figure 8-7 Removing the memory module cover

6.Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before pressing it down until the latches on either side snap into place.

Slot A

Slot B

Figure 8-8 Seating the memory module

Align the grooves along the edges of the memory module with the locking tabs on the connector and insert the module into the connector firmly. If you find it difficult to install the memory module, gently prize the locking tabs outwards using the tip of your finger. Ensure that you hold the memory module along its left and right hand edges - the edges with the grooves in.

■Never allow metal objects, such as screws, staples and paper clips, to enter the PC or keyboard. Foreign metal objects can create a short circuit, which can cause PC damage and fire, possibly resulting in serious injury.

■Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems.

User’s Manual 8-9