Toshiba tecra s3 Dynamic CPU Frequency Mode, Wake-upon LAN, Built-inLAN, CPU, LAN, Enabled, Enabled, Disabled, Disabled, Switchable, Always Low, Dynamically, Always High

HW Setup

CPU

This function lets you set the CPU operating mode.

This option is displayed only for models with a Pentium-M®processor.

Dynamic CPU Frequency Mode

This option lets you choose from the following settings:

Dynamically	CPU power consumption and clock speed
Switchable	automatic switching function is enabled. When
	the computer is in use, CPU operation is
	automatically switched when necessary
	(Default).
Always High	CPU power consumption and clock speed
	automatic switching function is disabled. The
	CPU always runs at its fastest speed.
Always Low	CPU power consumption and clock speed
	automatic switching function is disabled. The
	CPU always runs at low power consumption and
	low speed.

LAN

Wake-up on LAN

This feature lets the computer’s power be turned on when it receives a wake-up signal from the LAN.

Enabled	Enables Wake-up on LAN.
Disabled	Disables Wake-up on LAN (Default).

Do not install or remove an optional memory module while Wake-up on LAN is enabled.

The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

Built-in LAN

This feature enables or disables the Built-in LAN.

Enabled	Enables Built-in LAN functions (Default).
Disabled	Disables Built-in LAN functions.

User’s Manual 7-7