Toshiba tecra s3 manual Power button, LCD Sensor switch

	The Grand Tour
TOSHIBA	Press this button to change internal display,
Presentation button	simultaneous display, or multi-monitor display.
	The default setting is the simultaneous display on
	LCD and CRT with resolution of 1024 × 768.
	When you press this button twice, the display
	mode returns to single display on LCD only.
	Setting of multi-monitor display in Windows XP,
	computer changes its display mode to the multi-
	monitor display on LCD and CRT. You can also
	return to single display by pressing this button
	twice.
	The setting of TOSHIBA Presentation button can
	be changed through the properties of TOSHIBA
	Controls. Display mode is changed to the multi-
	monitor display by selecting "Different Image"
	(Windows XP only) or to the simultaneous
	display on internal and external display by
	selecting "Same Image".
TOSHIBA Assist	Press this button to launch the program
button	automatically. When power-off, stand-by and
	hibernation, press this button to start the
	computer and launch the program.
	You can select the function on TOSHIBA
	Controls properties.
	The default is TOSHIBA Assist.
Power button	Press the power button to turn the computer’s
	power on and off.
LCD Sensor switch	This switch senses when the computer’s LCD
	display panel is closed or opened and activates
	the Panel Power Off/On feature. When you close
	the LCD display panel the computer enters
	Hibernation Mode and shuts down. When you
	open the computer's LCD display panel the
	computer starts in Hibernation Mode. Use the
	TOSHIBA Power Saver Utility to enable or
	disable this feature. The default is “enabled”.
	Refer to the TOSHIBA Power Saver Utility and
	Panel Power Off/On items in Chapter 1, Special
	features, for details on settings.

Do not put a magnetic object close to the switch. The computer will automatically enter Hibernation Mode and shut down even if the Panel Power Off features is disabled.

User’s Manual 2-11