Toshiba tecra s3 manual Using optical media drives, Inserting a module

Operating Basics

Inserting a module

Insert the Ultra Slim Bay HDD adaptor as described below.

1.Insert the Ultra Slim Bay HDD adaptor in the computer as shown below and press until the ejector clicks.

2.If you want to lock the Ultra Slim Bay HDD adaptor, set the Ultra Slim Bay lock screw in the hole for the lock position (➁). The lock screw is inserted in the unlock position (➀) at the time of purchasing.

Lock screw

Ultra Slim Bay HDD adaptor

Figure 4-5 Inserting the Ultra Slim Bay HDD adaptor

Using optical media drives

The text and illustrations in this section refer primarily to the optical media drive. However, operation is the same for other optical drive in the Ultra Slim Bay. The full-size drive provides high-performance execution of CD/ DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD- ROM, an indicator on the drive glows and the Ultra Slim Bay indicator glows.

Use the WinDVD application to view DVD-Video discs.

If you have a DVD-ROM&CD-R/RW drive, refer also to the Writing CDs on DVD-ROM&CD-R/RW drive section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on DVD Super Multi drive section for precautions on writing to CDs/DVDs.

When the power of the optical media drive is off, pressing the Fn + Tab keys will turn the power of the optical media drive on. Furthermore, it is possible to set it to turn the power of the optical media drive on and eject the tray at the same time.

User’s Manual 4-13