ο9. Complete condensate drain line connections on
units.
ο10. Install automatic changeover sensor option on the supply water line.
ο11. Install automatic electric heat lockout switch option on the supply water line.
ο12. Install condensate overflow switch option correctly on the auxiliary drain pan.
ο
ο
ο
13.Install the low temperature detection device option correctly.
14.Complete all necessary duct connections.
15.Complete all interconnection wiring for the wall mounted fan
mode switch or zone sensor per the wiring schematic and guidelines established in the “Wall Mounted Control Interconnection Wiring” section on page 35.
ο16. Install the wall mounted fan mode switch, or zone sensor module options properly.
ο17. Connect electrical supply power according to the NEC and unit wiring diagrams.
ο19. Remove any miscellaneous debris, such as sheetrock, that may have infiltrated the unit during construction.
ο20. Replace the air filter as required.
14 |
