BIP2: Motion Detection

Autocycle Test

Terminal Unit

Control (TUC)

The motion detection input when used with a motion detection switch (installer supplied) detects the absence of motion in the space during the occupied mode. If no motion is detected, the TUC controls the space to alternate heating and cooling setpoints while also controling the economizer damper option to the minimum position. The factory configures the 24V dry contact input as normally closed. However, it can also be normally open if using the correct switch. A closed signal indicates alarm.

The autocycle test is an operating mode that activates the TUC outputs in a defined series of steps. This function allows the techni- cian to to manually exercise each TUC output by sequentially stepping through the 16 stages of the autocycle test

Note: Do not leave unit unattended while in test mode because the unit safety shutdowns are not functional.

Note: During the autocycle test, the TUC ignores all unit safety diagnostics. Take precautions to ensure the hydronic coil is not subject to freezing conditions.

!CAUTION: If the TUC is left in the autocycle test mode, it will automatically return to normal unit opera- tion after 60 minutes.

To place the TUC in the autocycle test mode, perform the following steps. Refer to Table 23 onpge 72 for details on the staging.

1.Read and record the initial TUC address.

2.Set the TUC DIP switch #7 to ON (address = 2). All other switches should be off.

3.To automatically cycle through the stages, short and hold the TUC test input (short J11 and J12 together). Continue holding the test input and the unit will cycle to each subsequent stage every 30 seconds.

4.To manually step between stages, momentarily short the test input to advance to the next test stage.

5.When the autocycle test is complete, return the DIP switches to

the initial positions recorded in step 1. Short the test inputs to set the address in the TUC EEPROM.

UNT-IOM-6

99

Page 98 Page 100
Page 99
Image 99
Trane LO manual BIP2 Motion Detection Autocycle Test
Page 98 Page 100

LO specifications

Trane LO is a cutting-edge solution in the HVAC sector, designed with advanced engineering and smart technologies to meet diverse climate control needs. Renowned for its reliability and efficiency, Trane LO offers a wide array of features that set it apart in the market.

One of the core characteristics of Trane LO is its energy efficiency. Equipped with variable speed compressors, the system can adjust its output according to the cooling or heating demand, ensuring optimal energy use. This feature not only reduces energy consumption but also lowers utility bills for users. Additionally, Trane LO units often come with a SEER (Seasonal Energy Efficiency Ratio) rating that ensures top performance during hotter months.

Incorporating state-of-the-art technology, Trane LO features Smart Technology integration. Through IoT (Internet of Things) capabilities, users can monitor and control their HVAC systems remotely via smartphones or smart home devices. This feature promotes convenience and ensures that energy use can be optimized from anywhere, giving users greater control over their indoor climate.

Another standout technology in Trane LO is its use of environmentally friendly refrigerants. The system is designed to utilize low-GWP (Global Warming Potential) refrigerants, making it compliant with modern environmental standards and contributing to a greener planet.

The Trane LO also emphasizes durability. Constructed with high-quality materials, including weather-resistant finishes, these units are built to withstand various environmental conditions, ensuring they maintain peak performance over the years.

Noise reduction is another critical aspect of the Trane LO line. With features such as sound blankets and vibration dampening technology, the units operate quietly, ensuring that the comfort of users is not compromised by disruptive noise levels.

Maintenance is simplified with the Trane LO, as several units are engineered for easy access to essential components, promoting hassle-free servicing. This is vital for prolonging the lifespan of the system and reducing maintenance costs.

In summary, Trane LO represents a fusion of energy efficiency, advanced technology, environmental responsibility, durability, and user-friendly features. Whether for residential or commercial applications, Trane LO systems stand as a reliable choice for effective climate control.
Top Page Image Contents