•To create these featureaccess buttons proceed as follows:
1. Press OPTIONS.
2. Press NEXT until FEATappears.
3. Press FEAT.
4. Press NEXT repeatedly until desired feature choice is displayed.
5. Press one of the buttons belowcurrently displayed selections to
choose desired selection.
6. Respond to anymenu prompts associated with feature (such as
all-call or zone 1 to 3 for PAGEor orbit 1 to 9 for PARK).
7. Press programmable buttonfor storage location.
8. Press PREV or NEXT until nextfeature choice is displayed or
until EXIT is displayed;
9. Repeat last two steps until all feature buttonsare programmed,
—OR—
press EXIT to end.
Toclear a feature access button assignment, repeat the programming
procedure but press CLEAR before pressing storage location button.
GCA70–245 Programming Your Telephone
LCD Speakerphone Reference Manual 10–7