Vertical Communications DSU and DSU II manual Setting Your Personal Ringing Tones

GCA70–245 Using The Other Telephone Features

When you change the loudness, that change remains in effect until you change it again (referred to as default setting).

∙Set the speaker, headset, handset, or group listening loudness for all future calls using the following steps:

1.Press INTERCOM.

2.Choose speaker, headset, handset, or group listen mode to be affected.

3.While in that mode, press VOLUME UP or VOLUME DOWN to adjust loudness.

4.Dial ✳ ✳ 5 to hold the loudness at the last setting for all future calls (until it is changed again).

5.Repeat this procedure in each mode until all default volume levels have been properly set.

NOTE: You may adjust the volume of a call in any mode (over speaker, headset, handset or group listen), at any time during the call, by pressing VOLUME UP or VOLUME DOWN. When the call ends, the volume of all future calls is reset to the programmed (default) setting.

8.16 Setting Your Personal Ringing Tones

You can choose one of six different ring tones for your telephone when it rings. Often, when several telephones are located close together, each user chooses a different personal ring tone.

∙To select one of the ring tones, proceed as follows:

1.Press OPTIONS.

2.Press NEXT until RING appears.

3.Press RING.

4.Press UP or DOWN to choose ring tone in display (a new tone will sound at each up or down press).

5.Press SPEAKER to end. The next time your telephone rings, you will hear the new ring tone.

LCD Speakerphone Reference Manual 8–15