Vertical Communications DSU and DSU II manual Switching The Dialing Mode Between Pulse And Tone

Using The Other Telephone Features GCA70–245

8.17Switching The Dialing

Mode Between Pulse And Tone

If your local telephone service is pulse (rotary dialing), your telephone is arranged to dial in this manner (when programmed to do so by the installer). If you need to send tones during a dialing sequence (e.g.; to send bank-by-phone tones, etc), you can convert to tone while dialing. The system will switch back to pulse dialing when you end your call. You can store a # as part of an automatic dialing number to

effect pulse-to-tone switching where needed.

∙To convert to tone dialing at any time during dialing or while on an active call,

1.Press #.

8.18 Using Background Music

If background music is supplied by the telephone system, you can turn it on at your telephone speaker. Background music automatically turns off during calls and voice announcements.

∙To turn the music on,

1.Press OPTIONS.

2.Press NEXT.

3.Press MUSIC.

4.Press ON.

5.Press SPEAKER to end (the SPEAKER light turns on when background music is on).

6.Adjust the loudness of the music with the speaker volume control.

∙To turn the music off,

1.Press OPTIONS.

2.Press NEXT.

3.Press MUSIC.

4.Press OFF.

5.Press SPEAKER to end (the SPEAKER light turns off when background music is off).

8–16 LCD Speakerphone Reference Manual