GCA70–245

Using The Other Telephone Features

Program the enable/disable buttons (at any blank programmable button location) as follows:

1.Press INTERCOM.

2.Dial ✳ ✳ 1.

3.Press programmable button.

4.Dial a feature code

94 = Headset Button,

95 = External Ringer Button,

96 = Tape Recorder Button,

97 = External Pager Button.

5.Press TRANSFER/CONFERENCE.

6.Repeatedly press programmable button and dial separate codes repeatedly until all four buttons are programmed, if desired,

—OR—

press SPEAKER to end.

To use a feature button,

1.Press desired button to enable mode.

When you press the button, the feature is enabled and you can use the corresponding auxiliary device. The display denotes the feature and shows it to be enabled. For example, when you press the HEADSET button, the display shows “Headset Enabled” and you can operate the telephone with a headset.

To disable any active mode, press the corresponding feature button to alternate off.

LCD Speakerphone Reference Manual 8–21

Page 93
Image 93
Vertical Communications DSU and DSU II manual Press TRANSFER/CONFERENCE, ∙ To use a feature button