4.3 Redialing
If the last number you havecalled is busy or is not answering, you have
severaloptions for redialing it. Youcan redial it once, initiate a
repeated redialingof it, or save it for later redial using a
preprogrammed savednumber redial button. Refer to the procedures
givenin the programming section of this user’s guide to preprogram a
savednumber redial button.
•To redial the last dialed number one time,
1. Press SPEAKER (or hang up handset) to disconnect current
ringing or busytone.
2. Press #.
3. Listen for ringing or busy tone over the monitor speaker:
—Ringing tone: When party answers,pick up handset.
—Busy tone: Press SPEAKERto disconnect.
•To redial the number oncea minute for 10 minutes,
1. Press ARDL button.
The number will be dialed once a minute for 10 minutes (INTERCOM
light flashes). Listenfor ringing or busy tone over the monitor speaker.
NOTE:You must pick up the handset once the call is connected, or the
system will disconnect the callafter 30 seconds.
•To cancel this automatic redialaction (INTERCOM light turns
off) with any of the following actions,
1. Lift and replace handset.
—OR—
—use the telephone for some other function.
The system will save the first 16di gits of the last manually dialed
number so that it can be redialed later; however,subsequent dialing
activityoverwrites any number the system has temporarily saved.
•To store one 16-digitnumber,
1. Dial the number you wish to store and press SAVE.
2. To dial the stored number,press HOLD andthenpresstheSAVED
NUMBER REDIAL button that was preprogrammed for this
purpose.
GCA70–245 Making Calls
LCD Speakerphone Reference Manual 4–3