Vertical Communications DSU and DSU II manual Making Unsupervised Conference Calls

Conferencing Calls GCA70–245

∙To retrieve a line from hold and bring that party back into the conference,

1.Press TRANSFER/CONFERENCE.

2.Press line button.

3.Press TRANSFER/CONFERENCE.

NOTE: If all the conference circuits are busy, you will not be able to add a party to the conference. The message “Conference Full” will appear in your display.

7.2 Making Unsupervised Conference Calls

∙To drop out of a conference call between you and two outside lines (creating an unsupervised conference),

1.Dial # and hang up (lines remain lighted/in use until one or both outside parties disconnect).

∙To rejoin an unsupervised conference between two outside lines,

1.Press one of the lighted buttons where conference is taking place.

NOTE: Conference volume levels are dependent upon the quality of the external lines.

7–2 LCD Speakerphone Reference Manual