10.6 Response Message Programming
This program lets you set up a button to be used for making a
non-verbal response to a SOHVAor an intercom call. The response
appears in the display of the calling station.
•To assign a button for non-verbal response:
1. Press INTERCOM ✳✳1.
2. Press the programmable buttonyou want to use for
message access.
3. Dial 5.
4. Dial a message number (0through 9).
NOTE:The preprogrammed messages are created by the
attendant.
5. Press SPEAKER to end.
10.7 Automatic Redial Programming
•To program a button on yourtelephone for redialing calls you
make that are either busyor do not answer,
1. Press INTERCOM ✳✳1.
2. Press programmable button.
3. Press #.
4. Press SPEAKER to end.
When you push this programmed button after having made a call that is
busy ordoes n’tanswer, the system will automatically dial the number
everyminute for 10 minutes and ring the number for approximately 30
seconds. Tocancel auto-redial, simply lift and replace the handset.
NOTE:When the party you are calling in the automatic redial mode
answers, you must liftthe handset to end the automatic redial
mode and establish the conversation. At anytime thereafter,
you may revertto the speakerphone mode, if your telephone is
so equipped.
GCA70–245 Programming Your Telephone
LCD Speakerphone Reference Manual 10–9