
Programming Your Telephone |
10.2 Storing Autodial And Speed Dial Numbers
∙To store an outside number or a feature code as an autodial or speed dial number, follow the display prompts and proceed as follows:
1.Press OPTIONS.
2.Press NEXT until ADIAL and SDIAL is displayed.
3.Press ADIAL to choose autodial programming or SDIAL to choose speed dial programming.
4.Press programmable button or keypad button to choose storage location.
5.Press line button to dial out on or press INTERCOM,
if your system provides line groups, dial 1, 2, 3, or 4 for line group 1, 2, 3, or 4, or dial 0 to have the system automatically choose line for you.
6. Dial any number (up to 16 digits
NOTE: You may need a pause between numbers to compensate for differences in response time between your system and the host system (ask your attendant about this). To store a pause, press HOLD , then continue dialing. If your system is behind a host system that needs a hookflash to access a feature, press TAP to store a hookflash, then continue dialing. Also, you may need to erase the typed digits appearing in your display to correct them. If you do, press BKSP once for each digit to be removed.
7.Press SAVE to store number.
8.Press next location button and store next number.
9.Repeat previous step until all numbers are stored,
press SPEAKER to end.
To store a system feature access code instead of an outside number, follow the above procedure except do not make a line selection before dialing the number. Instead, dial the access code for the feature after selecting the button location. For example, to program a group call pick up button, press the programmable button, press INTERCOM, dial # 4, then press SAVE.