Vertical Communications DSU and DSU II manual Using Toll Restriction Override

GCA70–245 Using The Other Telephone Features

8.19 Using Toll Restriction Override

You can override one station’s toll restriction assignment by dialing a programmed four-digit TRO code at another station prior to dialing your desired number. When you do this, the system replaces the toll restriction requirements of the station that you are using with those that match your home station. After entering a TRO code at another station, you will get your own prime line or idle line preference and its accompanying toll restriction assignment. You then have 15 seconds to dial an outgoing call. Once you have hung up from a call, you have 15 seconds to make another call without re-entering your TRO code. If you transfer a TRO call or place it on hold and pick it up at another station, the call belongs to the new station.

∙To use TRO at a station,

1.Press INTERCOM,

2.Dial ✳ ✳ 6.

3.Dial your station extension number.

4.Dial your TRO code number (TRO code is not displayed— instead an ✳ is shown).

5.Within 15 second timeout period, dial desired outgoing line number.

6.Hang up handset or press SPEAKER to end call. You will have 15 seconds in which you can make another call without re-entering your TRO code.

∙To clear the TRO code,

1.Press INTERCOM,

2.Dial ✳ ✳ 6,

3.Press SPEAKER.

LCD Speakerphone Reference Manual 8–17