Xerox 701P35371 manual P R I N T I N G B A N N E R S, 3.10, Printing Banners, select Bypass Tray

P R I N T I N G B A N N E R S

	Printing Banners
	For printing banners, we recommend you use 20
	lb. or 75 gsm paper. You can feed up to five sheets
	of banner paper through the bypass tray.
1	After you open your document and select File:
	Print, click on the Properties button, then the
	Paper/Output tab, then select Banner in the
	Paper size list box. In the paper source list box
	select Bypass Tray.
2	Tear off the number of sheets you will need to
	print your banner (5 maximum).
3	Tear off the perforated edges and fan the stack to
	separate the edges.
4	Open the bypass tray, which is located on the back
	of the machine, to the flat position.
5	Place the unattached edge into the bypass tray slot
	on the back of the machine. Push the paper down
	until resistance is met. If inserted correctly, the
	banner feeds into the machine, then pauses until
	you click OK.
6	Sheets will continue to feed until printing is
	complete.

3.10

U s e r G u i d e