Zoom MRS-1044 Appendices, ■LINE ALGORITHM

Appendices

Effect type/parameter list

MODULATION/DELAY MODULE

TYPE	PARAMETER 1	PARAMETER 2	PARAMETER 3				PARAMETER 4	PARAMETER 5	PARAMETER 6
	DEPTH	RATE				MIX	--	--	--
CHORUS	Stereo chorus with clear sound and great spaciousness.
	DEPTH	RATE				FB	--	--	--
FLANGER	An effect that adds a pronounced character and modulation to the sound.
	RATE	COLOR			--		--	--	--
PHASER	An effect that adds a swooshing modulation to the sound.
	DEPTH	RATE			CLIP		--	--	--
TREMOLO
	An effect that cyclically varies the volume.
	SHIFT	TONE		BALANCE			--	--	--
PITCH	An effect that modifies the pitch of the original sound.
	RATE	BALANCE			--		--	--	--
RingMod	An effect that produces a metallic resonance.
	FREQ	DEPTH		LowBoost			--	--	--
EXCITER
	An effect that gives the sound more focus and spatial definition.
	SIZE	TONE				MIX	--	--	--
AIR
	Simulates the effect of air on the room resonance, giving the sound spatial depth.
	TIME	FB				MIX	--	--	--
DELAY	A delay effect with a maximum of 500 mSec.
	TIME	TONE				MIX	--	--	--
DOUBLE (*1)	A doubling effect that allows the delay time to be set in 1 mSec steps up to 100 mSec.
	TIME 1	TONE 1			MIX 1		TIME 2	TONE 2	MIX 2
DOUBLE (*2)
	A doubling effect that allows the delay time to be set in 1 mSec steps up to 100 mSec.
*1: When a SINGLE type effect is selected for the COMP/LIM module
*2: When a DUAL type effect is selected for the COMP/LIM module (usable only with DOUBLE)
Explanation of MODULATION/DELAY MODULE parameters
Parameter name		Range					Explanation of parameter
DEPTH	SINGLE	0 – 10				Specifies the depth of the effect.
RATE	SINGLE	1 – 30				Specifies the speed of the effect.
COLOR	SINGLE	1 – 4				Modifies the type of phase tone.
CLIP	SINGLE	0 – 10				Emphasizes the effect.
SHIFT	SINGLE	-12.0 – 24.0				Specifies the amount of pitch shift produced by the pitch shifter.
BALANCE	SINGLE	0 – 30				Adjusts the balance between the direct sound and effect sound.
FREQ	SINGLE	1 – 5				Specifies the frequency.
LowBoost	SINGLE	0 – 10				Emphasizes the low range.
SIZE	SINGLE	1 – 10				Specifies the spatial width.
FB	SINGLE	TYPE = FLANGER : -10 – 10				Adjusts the amount of feedback.
		TYPE = DELAY : 0 – 10
TIME	SINGLE	TYPE = DELAY : 1 – 50				Sets the delay time. ( x 10 mSec )
		TYPE = DOUBLE : 1 – 100				Sets the delay time. ( x 1 mSec )
TIME 1	DUAL ( Lch )	1 – 100				Sets the delay time. ( x 1 mSec )
TIME 2	DUAL ( Rch )
TONE	SINGLE
TONE 1	DUAL ( Lch )	0 – 10				Adjusts the tone.
TONE 2	DUAL ( Rch )
MIX	SINGLE
MIX 1	DUAL ( Lch )	0 – 30				Adjusts the mix amount of the effect.
MIX 2	DUAL ( Rch )

■LINE ALGORITHM

COMP/LIM MODULE

TYPE	PARAMETER 1	PARAMETER 2		PARAMETER 3
COMP	SENS		ATTACK	LEVEL
	A stereo input/output compressor.
LIMITER	THRSHOLD	RELEASE		LEVEL
	A stereo input/output limiter.
Explanation of COMP/LIM MODULE parameters
Parameter name	Range			Explanation of parameter
SENS	0 – 15		Specifies the input sensitivity of compression.
ATTACK	0 – 15		Adjusts the speed at which compression is applied.
LEVEL	1 – 8		Specifies the output level of the module.
THRSHOLD	0 – 15		Specifies the sensitivity at which the limiter will begin to apply.
RELEASE	0 – 15		Specifies the time from when the input signal falls below the threshold until compression ends.

ISOLATOR MODULE

TYPE	PARAMETER 1	PARAMETER 2		PARAMETER 3	PARAMETER 4	PARAMETER 5
ISOLATOR	XOVER_Lo	XOVER_Hi		MIX_HIGH	MIX_MID	MIX_LOW
	An effect that divides the signal into three frequency bands, and lets you specify the mix amount.
Explanation of ISOLATOR MODULE parameters
Parameter name	Range			Explanation of parameter
XOVER_Lo	50 – 16000		Specifies the frequency at which the Lo/Mid bands will be divided.
XOVER_Hi	50 – 16000		Specifies the frequency at which the Mid/Hi bands will be divided.
MIX_HIGH	OFF, -24 – 6		Specifies the mix amount of the high range.
MIX_MID	OFF, -24 – 6		Specifies the mix amount of the mid range.
MIX_LOW	OFF, -24 – 6		Specifies the mix amount of the low range.

102

ZOOM MRS-1044